AIR CONDITIONER DETAIL INSTALL |SPLIT DUCTLESS AC HEATING INVERTER,MINI PUMP SYSTEM SETUP,DIY HOW TO
TLDRCarl shares a step-by-step guide on installing a split ductless AC heating inverter and mini pump system. He discusses the features of the 9,000 BTU 2.6 kw precharged inverter kit, including energy efficiency, quiet operation, and smartphone control. The video details the process of mounting the indoor and outdoor units, connecting cables and coolant lines, and creating a vacuum before operation. Carl emphasizes the importance of proper installation for optimal performance and efficiency.
Takeaways
- 🛠️ Installed a 9,000 BTU 2.6 kW split ductless AC heating inverter system for the new office.
- 🌿 The system is energy-efficient, quiet, and has an antibacterial coating on the fins.
- 🌱 Uses environmentally friendly refrigerant and can be controlled via WLAN with a smartphone app.
- 📦 The kit comes with prefilled coolant unit, 9 feet of refrigerant piping, and necessary small parts.
- 🧱 The indoor unit is lightweight and includes a cable, manual, remote control, and wall holder.
- 🔨 Measured and marked the wall for the installation, ensuring proper distance from the ceiling for air flow.
- 🚿 Drilled holes with a masonry drill and used a wet & dry vacuum cleaner to manage dust.
- 🔌 Connected power cable and other wires to the indoor unit, following the labeled wiring instructions.
- 🔩 Properly connected coolant lines with specific torque, using a crow foot set and torque wrench.
- 💧 Added a line for condensed water and secured all lines with insulation and protective tape.
- 🏠 Pushed the bundled lines through the wall hole with assistance and mounted the indoor unit on the wall bracket.
- 🔧 Mounted the outdoor unit with adjusted screws for stability and connected it to power and the indoor unit.
Q & A
What type of air conditioning system is Carl installing in his new office?
-Carl is installing a split air conditioning system that is used for both heating and air conditioning. The specific model he chose is a 9,000 BTU 2.6 kW precharged inverter kit.
What are some of the features advertised by the manufacturer for this particular air conditioning system?
-The manufacturer advertises that this system saves energy, operates quietly, has an antibacterial coating on the fins, uses a new environmentally friendly refrigerant, and can be controlled via WLAN with a smartphone app.
What components come with the air conditioning system package?
-The package comes with a prefilled coolant unit, 9 feet of refrigerant piping, small parts such as a feedthrough tube, insulation tape, sealant, rubber mounts, and an outer wall bracket.
How does Carl ensure the proper mounting of the indoor unit on the wall?
-Carl measures the distance between the holes of the wall bracket from the outer edge of the unit, marks the height of the upper holes with a level, and ensures a minimum distance of half a foot from the ceiling for proper airflow. He then uses a 5 mm masonry drill with a Bosch Hammer to make the holes.
What is the process Carl follows to drill a hole in the wall for the air conditioning system?
-Carl first marks the position of the hole using the installation manual's distances for each unit. He pre-drills the shank hole with a long masonry drill, ensuring the hole is angled on a downward slope. He then uses a 65mm concrete shank drill bit to make the hole, emptying out the drill every few inches.
How does Carl handle the wiring and connection of the indoor unit?
-Carl connects all cables and wires to the indoor unit starting with the power cable. He uses a torque wrench to tighten the connections with specific torques depending on the diameter of the lines. He also connects the coolant lines and the line for condensed water, securing them with the appropriate torque.
What precautions does Carl take to protect the lines running from the indoor to the outdoor unit?
-Carl wraps the lines with insulation material for heating pipes, which he bought separately. He then uses the provided thin plastic tape to keep the insulation tight and protected. For the lines to be routed properly, he uses 3-inch PVC pipes and wall clamps with rarl plugs.
How does Carl ensure the outdoor unit is securely mounted?
-Carl uses the supplied 14mm rarl plugs and screws to mount the bracket rails. However, finding the screws too thin, he replaces them with thicker and shorter screws for a tighter fit. He also uses anti-vibration feet for additional stability.
What is the process Carl follows to create a vacuum in the lines before the system is operational?
-Carl uses a hand pump to create a vacuum of about -1 bar in the clear plastic hose. He then presses the pump onto the valve, using a piece of wire to transfer the vacuum into the copper lines. He waits 24 hours to ensure the vacuum remains stable before proceeding.
How does Carl complete the installation and what are the results?
-After ensuring the vacuum is stable, Carl opens the valve to allow the factory-filled coolant to flow from the outdoor unit into the lines. He insulates the connecting lines for efficiency and turns on the power with a separate fuse. Upon testing, all modes of the device work fine, including automatic, cooling, drying, and heating modes.
What is the legal notice Carl provides at the end of the video?
-Carl notes that for some countries, the device shown in the video was not put into service as demonstrated, but should be installed by a certified company. This is a legal requirement for certain regions to ensure safety and proper installation standards.
Outlines
🛠️ Installing a Split Air Conditioner
Carl introduces his new office's split air conditioner installation project. He chose a 9,000 BTU, 2.6 kW precharged inverter kit for its energy efficiency, quiet operation, and environmental friendliness. The system includes a prefilled coolant unit, refrigerant piping, and other necessary parts. Carl emphasizes the importance of proper installation, starting with measuring and marking the wall for the indoor unit and drilling holes using a masonry drill and a vacuum cleaner to manage dust. He also mentions the tools used and the absence of rawl plugs and screws, which he links in the video description.
🔧 Connecting Electrical and Coolant Lines
Carl proceeds with the installation by connecting the indoor unit's electrical cables and wires, noting the ease of connection due to labeled wires. He then focuses on the coolant lines, stressing the importance of correct bending and torque application based on the unit's manual. Carl uses a crow foot set and a torque wrench to secure the connections properly. He also installs a line for condensed water and wraps all lines in insulation material for protection. The process involves careful handling to prevent damage to the lines and ensure efficient functioning of the AC system.
🏠 Mounting Indoor and Outdoor Units
In this section, Carl describes the process of pushing the bundled lines through the wall hole and securing the indoor unit on the wall bracket. He emphasizes the need for two people during this process to manage the lines and the indoor unit. For the outdoor unit, Carl uses insulating foam spray and a neoprene compound to seal the hole, and PVC pipes to protect the lines. He also discusses the challenges with the mounting rails and his solution of using thicker screws. The outdoor unit is then secured with anti-vibration feet for stability.
🔌 Wiring and Powering the AC System
Carl explains the process of wiring the AC system, starting with running a separate wire from the house fuse box to the outdoor unit, protected by a wall cord cover. He details the simple connection process due to the clearly marked contacts. The indoor unit receives power through this connection, eliminating the need for an extra power connection. Carl also discusses the importance of using the correct torque when connecting the copper lines and the necessity of creating a vacuum in the lines before operation. He shares his experience using a hand pump to achieve the vacuum and confirms the stability of the vacuum after 24 hours.
🌡️ Testing and Recommending the AC System
After completing the installation, Carl tests the system using the remote control, confirming that all modes - automatic, cooling, drying, and heating - function correctly. He notes the quiet operation of the indoor fan and confirms his satisfaction with the product. Carl mentions that he purchased the unit and tools from Amazon and provides affiliate links for viewer support. He ends with a legal notice regarding professional installation in some countries and thanks the viewers for their support.
Mindmap
Keywords
💡Split Air Conditioner
💡Inverter
💡Antibacterial Coating
💡Environmentally Friendly Refrigerant
💡WLAN Control
💡Wall Bracket
💡Copper Lines
💡Condensed Water Line
💡Insulation
💡Vacuum
💡Outdoor Unit
Highlights
Installing a split air conditioner system for both heating and air conditioning purposes.
Chosen model is a 9,000 BTU 2.6 kW precharged inverter kit with energy-saving and quiet operation features.
System features antibacterial coating on fins, environmentally friendly refrigerant, and smartphone app control via WLAN.
The kit includes prefilled coolant unit, 9 feet of refrigerant piping, and essential small parts.
Indoor unit is lightweight and comes with a cable, manual, remote control, and wall holder.
Proper measurement and positioning of the indoor unit on a brick and concrete wall are crucial for effective airflow.
Drilling holes for the wall bracket and outdoor unit connection requires careful marking and use of a masonry drill.
Use of a wet & dry vacuum cleaner for indoor drilling to minimize dust.
Cautious drilling of a 65mm hole in the wall with a downward slope to ensure proper drainage.
Assembling the outdoor unit with insulating foam spray and a neoprene compound for sealing gaps.
Securing the unit with appropriate screws and anti-vibration feet for stability and noise reduction.
Running separate wiring from the house fuse box to the outdoor unit with a protective wall cord cover.
Creating a vacuum in the lines using a hand pump before the system operation.
Ensuring no leaks after 24 hours before opening the valve for the factory-filled coolant.
The system offers automatic mode, cooling, drying, and heating options for optimal comfort.
Indoor fan operates quietly even at the lowest level, making it suitable for an office environment.
The installation process is documented without sponsorship, and affiliate links are provided for tools and products used.
Legal notice: The device was not installed by a certified company, and the video is for informational purposes only.