NewTechWood Ultrashield Naturale Composite Siding All Weather System Horizontal Installation Guide
TLDRThe NewTechWood UltraShield wall siding offers a durable, low-maintenance solution for exterior walls and soffits. Its capped wood plastic composite design features superior color and texture with fade resistance. The system includes aluminum clips for secure, expandable installations and a true rainscreen effect. Available in various colors with a range of accessories, it requires proper ventilation and may need furring strips for uneven surfaces. NewTechWood advises working with professionals for installation and provides a comprehensive guide on their website.
Takeaways
- 🏠 UltraShield wall siding by NewTechWood is a high-quality solution for exterior walls and soffits, offering excellent longevity and low maintenance requirements.
- 🌈 The siding features capped wood plastic composite with engineered design, providing a range of unbeatable colors and textures, along with superior resistance to stains and fading.
- 🔩 Aluminum installation clips (part number AW08) are used to hold the boards securely, allowing for expansion and contraction, and functioning as locking clips to control the direction of movement.
- 💨 The clips facilitate air circulation behind the siding, serving as an effective rainscreen system and providing a quarter-inch standoff for ventilation.
- 🎨 UltraShield siding is available in a wide array of colors and complemented by numerous facia parts and accessories for a complete and seamless installation.
- 📐 If walls are not straight, furring strips or studs may be required to level out the surface before installation, though the use of battens is a site-specific decision left to the contractor.
- 🔩 For projects requiring special treatments like spanning more than one board length or finishing corners, specific facia pieces (US44, US45, US46, US47) should be installed, with screws placed 500mm (16 inches) apart.
- 📌 A starter strip (part number AW02) should be installed after snapping a chalk line to ensure level and straight placement, with each strip being one meter (39-3/8 inches) long.
- 🔨 When installing the wall cladding boards (US09, US30, US31), connect them to the furring strips or studs using the AW08 clips, ensuring they are no more than 16 inches apart when used as locking clips.
- 🏁 To finish the installation, install T7 rubber stoppers at the top of the furring strips or studs before placing the final top board.
- 👨🔧 NewTechWood strongly advises working with licensed professionals for the installation of UltraShield wall cladding components to ensure proper execution and safety.
Q & A
What is the primary purpose of UltraShield wall siding?
-UltraShield wall siding is designed as an ultimate solution for exterior walls and soffits, offering unbeatable colors and textures with superior stain and fade resistance, making it long-lasting and ultra low maintenance.
What materials and design features contribute to the durability of UltraShield siding?
-UltraShield siding combines the toughness and longevity of a capped wood plastic composite with an engineered design, providing superior resistance to stains and fading.
How do the aluminum installation clips (part number AW08) function in the installation process?
-The aluminum installation clips (AW08) hold the boards perfectly, allow for expansion and contraction, and can be used as locking clips to control the direction of movement. They also promote air circulation behind the siding as a true rainscreen system.
What is the recommended distance between screws when attaching facia pieces to the joists?
-It is recommended to space screws 500 millimeters (or 16 inches) apart when attaching facia pieces to the joists.
What is the significance of pre-drilling before screwing in screws during installation?
-Pre-drilling before screwing in screws helps to prevent damage to the material and ensures a more secure and precise fastening.
What is the length of the starter strip (part number AW02)?
-The starter strips are one meter (or 39-3/8 inches) long each.
How far apart should the AW08 aluminum clips be installed when connecting the board to furring strips or studs?
-The clips should be installed no more than 16 inches on center apart when installing.
How does one use the AW08 clips as locking clips?
-To use the AW08 clips as locking clips, one should use the secondary hole to screw into the actual board.
What is the recommended method for dealing with uneven substrates or sheathing?
-The use of battens or furring strips is recommended for leveling out uneven substrates or sheathing.
What is the final step in installing UltraShield wall cladding?
-The final step is to install the T7 rubber stoppers at the top of the furring strips or studs, and then install the final top board.
What is NewTechWood's recommendation regarding the installation of UltraShield components?
-NewTechWood strongly recommends working with licensed professionals when installing any of their UltraShield wall cladding components.
Where can one find the full installation guide for UltraShield siding?
-A full installation guide is available for download on the NewTechWood website at newtechwood.com/us/siding.
Outlines
🏠 Introduction to UltraShield Wall Siding
This paragraph introduces the UltraShield wall siding by NewTechWood, highlighting its benefits as the ultimate solution for exterior walls and soffits. It emphasizes the siding's combination of toughness and longevity due to its capped wood plastic composite material, along with its engineered design. The paragraph explains that the shield technology provides superior color and texture options, with excellent stain and fade resistance, making it a low-maintenance choice. The aluminum installation clips (part number AW08) are described as essential for holding the boards securely while allowing for expansion and contraction, functioning as a locking clip and enabling air circulation as a rainscreen system. The availability of various colors and accessories for a complete installation is also mentioned. The paragraph advises on the use of furring strips or studs for uneven walls and the recommendation of using battens for leveling. It concludes with a suggestion to contact NewTechWood's Technical Service for any questions and a reminder that the decision to use battens or furrings is site-specific and rests with the contractor.
Mindmap
Keywords
💡UltraShield wall siding
💡Aluminum installation clips (AW08)
💡Stain and fade resistance
💡Rainscreen system
💡Furring strips or studs
💡Battens
💡Ventilation
💡Facia pieces
💡Starter strip (AW02)
💡Tongue and groove, shiplap, or shadow line
💡Licensed professionals
Highlights
UltraShield wall siding is an ultimate solution for exterior walls and soffits.
The product combines toughness and longevity of capped wood plastic composite with an engineered design.
Shield provides unbeatable colors and textures with superior stain and fade resistance.
Aluminum installation clips (part number AW08) hold the boards perfectly and allow for expansion and contraction.
The clips function as a locking clip to control the direction of expansion and contraction.
Air circulation is enabled behind the siding as a true rainscreen system.
A wide variety of colors are available for the siding.
Comes with a multitude of facia parts and accessories for complete installation.
The clips provide a quarter-inch standoff for air circulation.
Furring strips or studs may be required for uneven substrates or sheathing.
Battens or furring strips are recommended for leveling out uneven surfaces.
The final decision on using battens or furrings is site-specific and rests with the contractor.
For spanning more than a single board length, install facia pieces including end facia US44, joint facia US45, outer corner facia US46, and inner corner facia US47.
A distance of 500 millimeters or 16 inches between screws is recommended when attaching the facia.
Pre-drill before screwing in the screws to attach the facia.
Install the starter strip (part number AW02) and snap a chalk line at the base for level and straight installation.
Starter strips are one meter or 39-3/8 inches long.
Connect the wall cladding boards to each furring strip or stud using AW08 aluminum clips.
Clips should be no more than 16 inches on center apart during installation.
Use the secondary hole to screw into the actual board as a locking clip.
Refer to the installation guide for instructions on where to place locking clips.
Work your way up the wall following the same pattern for installation.
Install T7 rubber stoppers at the top of the furring strips or studs to finish off the wall.
NewTechWood strongly recommends working with licensed professionals for UltraShield wall cladding installation.
A full installation guide is available for download on the NewTechWood website.