Is Metaltech Safeclimb scaffolding safe. Why did I buy two?
TLDRIn this Metal Tech scaffolding review, Tom discusses his experience assembling the six-foot Baker Scaffolding and shares his concerns about its safety features. Despite the assembly being straightforward, he finds the safe climb feature inadequate and the structure unstable without additional stabilizers and outriggers. Tom ultimately kept the scaffolding for its cost-effectiveness but warns viewers of the potential safety hazards and recommends additional equipment for stability.
Takeaways
- 🛠️ The video is a review of Metal Tech job site series six foot Baker Scaffolding.
- 🚫 The scaffolding is not recommended due to its instability and difficulty in use.
- 📦 The packaging was in poor condition, making it difficult to remove the scaffolding from the van.
- 🔨 Assembly instructions are simple, consisting of only six steps, but some mistakes were made during the process.
- 🔐 It is crucial to pin the feet and side supports in place for stability.
- 🧗 The safe step feature does not function properly and requires manual assistance to stay open.
- 🤔 The reviewer found it easier and safer to climb up from the outside of the scaffolding.
- 💸 The decision to keep the scaffolding was influenced by the cost of renting versus buying a second unit and outriggers.
- 🔨 Additional purchases like guard rails and outriggers are necessary for safer use.
- 🌬️ The video was filmed during a windy season, which affected the demonstration.
- ⚠️ The reviewer's safety officer at work would not approve of using the scaffolding in its initial state.
Q & A
What is the main topic of the video?
-The main topic of the video is the assembly and review of the Metal Tech job site series six foot Baker Scaffolding with new safe climb.
What issue did Tom encounter with the box of the scaffolding?
-Tom found that the box was falling apart, making it difficult to remove the scaffolding from the van by himself.
How many steps are there in the assembly instructions for the scaffolding?
-There are only six steps in the assembly instructions.
What was Tom's critique of the safe climb feature?
-Tom criticized the safe climb feature for not opening far enough to stay open on its own, making it difficult to use and requiring extra effort to climb up through it.
Why did Tom decide to keep the scaffolding despite his criticisms?
-Tom decided to keep the scaffolding because it was cheaper to buy a second one and the outriggers than to rent scaffolding for the time he needed it.
What additional components did Tom suggest purchasing for safety?
-Tom suggested buying guard rails and outriggers for added safety.
How did Tom stabilize the scaffolding?
-Tom used Luke stabilizers and a second unit to make the scaffolding more stable. He also recommended using ratchet straps on either side to cinch it down and prevent it from rocking.
What is Tom's profession-related concern with using this scaffolding at work?
-Tom expressed concern that his safety officer would disapprove of the scaffolding's stability and safety features, implying potential safety violations.
What was the purpose of Tom needing the scaffolding?
-Tom needed the scaffolding to install insulation in a high-up area.
What is Tom's overall recommendation of the Metal Tech scaffolding?
-Tom does not recommend the scaffolding on its own due to its instability and difficulty to use, but found it acceptable when paired with additional stabilizers and outriggers.
How did the windy season affect the video?
-The windy season caused noise during the video recording, as the wind was blowing at around 30 miles an hour.
Outlines
🛠️ Introduction to Metal Tech Scaffolding Review
In this paragraph, Tom introduces the topic of the video, which is a review of the Metal Tech job site series six-foot Baker Scaffolding with the new safe climb feature. He mentions his decision to keep the scaffolding despite not recommending it due to safety concerns and his choice to purchase a second unit and outriggers instead of renting scaffolding. The paragraph highlights the poor condition of the product's packaging and the inadequacy of the assembly instructions, which only consist of six steps.
Mindmap
Keywords
💡Metal Tech scaffolding
💡Assembly instructions
💡Safety
💡Stability
💡Guard rails
💡Outriggers
💡Ratchet straps
💡Insulation
💡Cost-effectiveness
💡Safety officer
💡Informative video
Highlights
Introduction to the Metal Tech scaffolding workshop video
Assembling the six foot Baker Scaffolding from Metal Tech
Concerns about the safety of the scaffolding's safe climb feature
The box's poor condition and difficulty in removing the scaffolding from the van
Assembly instructions overview and the first step involving feet and pinning
Second step of attaching side supports and the importance of pinning
The ease of standing up the scaffolding with locked feet
Platform locking mechanism using two levers
Testing the scaffolding's stability and its limitations
Discussion on the safe step feature and its usability issues
Personal preference for climbing up the outside for safety reasons
Decision to keep the scaffolding and purchase a second unit and outriggers
Cost comparison between buying and renting scaffolding
The need for insulation work and the role of the scaffolding
Warning about the instability of the scaffolding when used alone
Improvement in stability with stabilizers and a second unit
Use of ratchet straps to further stabilize the scaffolding
Consequences of using such scaffolding in a professional setting
Closing remarks on the informative nature of the video and future updates