HOW TO Install a Stemco Guardian Wheel Seal
TLDRIn this informative video, Travis demonstrates the installation of a Stemco Guardian HP Sill, a reliable oil seal used at Steven's Truck Power. After a thorough cleaning of the hub and spindle, Travis uses a special tool to fit the seal correctly. He emphasizes the importance of applying a minimal amount of oil to the seal for smooth assembly and proper functioning. The video concludes with the reassembly of the truck's brake system, highlighting the significance of oiling the hub for optimal performance.
Takeaways
- 🛠️ The video provides a tutorial on installing a Stemco Guardian HP Sill, a type of oil seal used in trucks.
- 🔧 The presenter has 20 years of experience using this specific oil seal and recommends it for its reliability.
- ❄️ The demonstration takes place outdoors in snowy conditions, showing the resilience of the process.
- 🧹 Cleaning is the first step in the installation process, emphasizing the importance of a clean surface for the seal.
- 🔩 The seal is placed on the spindle, not in the hub, which is a distinctive feature of this particular oil seal.
- 💡 A special tool is required for installing the seal, and no lubricant is needed for this process.
- 🔨 The seal is driven onto the spindle using a hammer and a driver tool, ensuring it is properly seated and squared up.
- 💧 A small amount of oil is applied to the seal to facilitate smooth assembly with the bearings and spindle.
- 🔩 The bearings are installed and oiled, with attention to applying oil both on top and to the lower layer for proper lubrication.
- 🔧 The hub is assembled with the seal and bearings in place, and the adjusting nut is tightened to secure everything.
- 🚚 The presenter highlights the importance of oiling the hub, as it is essential for the hub's operation and to prevent oiling issues.
Q & A
What is the main topic of the video?
-The main topic of the video is the installation of a Stemco Guardian HP Sill on a truck.
What is the significance of the Stemco Guardian HP Sill in the context of the video?
-The Stemco Guardian HP Sill is an oil seal that the presenter has been using for approximately 20 years with minimal issues, indicating its reliability and durability.
How does the presenter prepare the area for the installation of the seal?
-The presenter prepares the area by cleaning everything up, ensuring that the spindle and hub are free from debris and contaminants.
What is the correct placement of the Stemco Guardian seal?
-The Stemco Guardian seal should be placed on the spindle, not in the hub, which is noted as a distinctive feature of this particular oil seal.
What special tool is mentioned in the video for installing the seal?
-A driver tool is mentioned, which fits perfectly onto the seal, allowing it to be driven on with a hammer until it stops and bounces back slightly.
How does the presenter ensure that the seal is properly installed?
-The presenter ensures the seal is properly installed by checking that the lip of the seal is square and well-seated on the spindle.
What is the purpose of applying a little bit of oil on the seal?
-A little bit of oil is applied to the seal to ensure that the spindle or hub will slide on smoothly, facilitating proper installation and operation.
How does the presenter ensure the bearings are properly lubricated?
-The presenter ensures the bearings are properly lubricated by running gear oil through them, not just on top, but also allowing the oil to reach the lower layer by spinning the assembly.
What is the reason for oiling the Hub before reassembly?
-The Hub is oiled before reassembly because it is the only source of oil it gets, which runs down the axle after the truck is in motion. This ensures that the Hub has something to spin in and prevents oiling problems.
What is the final step in the installation process?
-The final step in the installation process is to adjust the axle, put the brake back on, and ensure that the rear end is fully oiled to prevent any oiling issues.
What is the presenter's overall opinion of the Stemco Guardian HP Sill?
-The presenter has a positive opinion of the Stemco Guardian HP Sill, stating that they have used it for a long time and have had no trouble with it, despite the extra effort required for the special installation tool.
Outlines
🛠️ Installing a Stemco Guardian HP Sill
The first paragraph of the video script introduces the process of installing a Stemco Guardian HP Sill on a truck. The speaker, Travis, explains that they have been using this particular oil seal for approximately 20 years at Steven's Truck Power with minimal issues. The video is set outside where a truck has been snowed on overnight. The main task involves installing a gas cam bushing and brakes, which requires removing the hub. Travis emphasizes the importance of cleaning the spindle and hub before installation and shares a tip about preventing water from entering the spindle by placing a rag at the end. The process of installing the Guardian seal is detailed, including the use of a special tool and ensuring the seal is properly seated. The paragraph concludes with the installation of the seal and preparation for the next steps.
🔧 Finishing the Installation and Adjustment
The second paragraph describes the continuation and completion of the installation process for the truck's wheel assembly. After installing the Guardian seal, the speaker, Travis, moves on to oil the seal and bearings, emphasizing the importance of applying just the right amount of oil to ensure smooth operation. The process of placing the bearings and outer bearing on the axle is explained, followed by tightening the adjusting nut and ensuring the hub is properly seated on the seal. Travis also discusses the importance of oiling the hub, as it is the only source of lubrication once the truck is in motion. The video ends with the adjustment of the axle, reassembly of the brake, and a final reminder to ensure the rear end is fully oiled to prevent any oiling issues. Travis concludes by recommending the Stemco Guardian product and thanking the viewers for watching.
Mindmap
Keywords
💡Stemco Guardian HP Sill
💡Oil Seals
💡Spindle
💡Hub
💡Installation
💡Special Tool
💡Gas Cam Bushings
💡Brakes
💡Wheel Bearing
💡Oiling
💡Adjusting Nut
Highlights
Introduction to installing a Stemco Guardian HP Sill
Use of a specific oil seal preferred by Steven's Truck Power
20 years of experience with minimal issues using the chosen oil seals
Truck preparation involving cleaning and assembly in snowy conditions
Importance of cleaning the hub and spindle for proper seal installation
Use of a special tool for installing the two-piece Guardian seal
Proper seating of the seal using a driver tool and hammer
Ensuring the seal lip is square and properly aligned
Applying a small amount of oil to the seal for smooth operation
Installing and oiling the bearings before reassembling
Using gear oil to lubricate the lower layer of bearings
Reassembling the hub with the sill surface cleaned
Filling the hub with oil and adjusting the nut for proper fit
Tightening the assembly and allowing the hub to seat on the seal
Oiling the hub to ensure smooth spinning and prevent oiling issues
Finalizing the assembly with the axle and brake reinstallation
Endorsement of Stemco Guardian seals for long-term reliability