1 Gig AT&T Fiber Internet Installation
TLDRAT&T technicians are in the process of installing a 1 Gig fiber internet connection at a residence. The fiber wire, thinner than coaxial cable, is being pulled from the street to the house's junction point. The connection will be consistent with existing house wiring, and the modem will be located in the living room. The installation is neat, with plans to bury the line within three weeks. The finished product includes a fiber box with extra slack and an AT&T gateway, marking the successful setup of high-speed internet.
Takeaways
- 🏠 AT&T Fiber installation is taking place at the speaker's house, which they describe as a significant job.
- 🔌 The fiber wire is noticeably thinner than a regular coaxial cable.
- 👨🔧 Technicians are pulling the cable from the connection point to a junction located two houses down.
- 📍 The connection is requested to come out on a specific side of the house to maintain consistency with existing connections.
- 🏠 The modem and networking equipment are located on the other side of the living room wall.
- 🕳 A hole will be made in the wall to route the wire inside for a clean finish.
- 🔚 AT&T has completed the initial installation, with a clean finish and extra slack in the fiber wire.
- 🌳 The fiber line will be buried in about three weeks, following the orange marks set by the technician.
- 📏 The line is buried approximately 20 to 40 feet away from the house, running across the backyard and around the house.
- 🔌 Inside the house, a box marks the entry point of the fiber, with extra slack provided for adjustments.
- 🖥️ The AT&T Gateway, a white box, is the final product of the installation, signifying the completion of the setup.
Q & A
What service is being installed at the house?
-AT&T Fiber Internet service is being installed at the house.
How does the fiber wire compare to a regular coaxial cable?
-The fiber wire is thinner compared to a regular coaxial cable.
Where is the connection cable coming from?
-The connection cable is coming from outside the house and is being pulled by the technician.
What is the purpose of the junction located two houses down?
-The junction is where the fiber wire is connected, acting as a central point for the network connection.
Why was the connection requested to come out on a specific side of the house?
-The connection was requested to come out on that side to match the existing connections and maintain consistency in the house's appearance.
Where is the modem and networking equipment located in the house?
-The modem and networking equipment are located in the living room on the other side of the wall from the installation site.
What is the process after the initial installation?
-After the initial installation, AT&T will have someone come out in about three weeks to bury the line.
How far is the fiber wire run from the house?
-The fiber wire is run about 20 to 40 feet from the house, across the backyard and around the side.
What is the final product of the installation inside the house?
-The final product inside the house includes a box with fiber coming in and extra slack, and a white box which is the actual AT&T gateway that was installed.
What will be done to the entry point of the fiber into the house?
-A cover will be obtained to conceal the entry point where the fiber wire comes into the house.
What is the technician's approach to burying the line?
-The technician marked the direction with orange marks, indicating the line will be buried some distance away from the house and around the property.
Outlines
🏠 Fiber Installation at Residence
The paragraph describes the process of fiber installation at a residential property. The technician from the service provider, AT&T, is observed pulling the fiber wire from the conduit pipe and extending it to the connection point located approximately two houses down the street. The fiber wire is noted to be thinner than a regular coaxial cable. The connection is strategically made on the side of the house to align with existing connections, ensuring a consistent appearance. The modem and networking equipment are located on the opposite side of the house, in the living room, and the technician plans to create an opening in the wall to route the wire internally. The installation is described as clean, with a minor detail of needing a cover for one of the holes. The plan is to have the line buried in about three weeks, with the technician marking the direction for the burial with orange flags. The line extends about 20 to 40 feet away from the house, crossing the backyard and reaching the street level where the cable initially came out. Inside the house, the finished product includes a box containing the fiber coming in with extra slack, and a white AT&T gateway box that has been installed by the technician.
Mindmap
Keywords
💡AT&T Fiber Internet
💡Installation
💡Fiber Wire
💡Connection Point
💡Junction Box
💡Modem
💡Networking
💡Conduit Pipe
💡Bury the Line
💡Att Gateway
💡Orange Marks
Highlights
AT&T Fiber Internet installation begins at the customer's house.
The fiber optic cable is noticeably thinner than a regular coaxial cable.
Cable is being pulled from the connection point to a junction two houses down.
The junction is where the fiber wire comes out from a conduit pipe and is connected.
The customer requested the connection to be on a specific side of the house for consistency.
A hole will be made in the wall to route the cable to the modem and networking equipment.
The installation process is clean and organized.
A cover will be needed for the entry point of the fiber wire into the house.
The line will be buried approximately three weeks after installation.
The burying process will involve running the line about 20 to 40 feet away from the house.
The fiber wire is routed around the house and back to the street level where it started.
The finished product inside the house includes a box with fiber optic cable and an AT&T gateway.
Extra slack is provided in the fiber optic cable for adjustments.
The AT&T representative handles the entire installation process.
The installation is efficient, with minimal disruption to the customer's property.
The final setup includes a white box which is the actual AT&T gateway.