WeatherTech® FloorLiner™: Installation Video
TLDRIn this informative video, David Mcneel demonstrates the correct installation of WeatherTech FloorLiner™ in a Ford F-150. He emphasizes the importance of removing existing floor mats, ensuring the vehicle floor is clean, and properly aligning the floor liners with the vehicle's retention systems. David also highlights the need to check the fit and securement of the liners, especially around the gas and brake pedals, to maintain safety and functionality. The video showcases the installation process for different vehicle models, highlighting variations in retention systems and the use of WeatherTech cleaner and protector for maintenance.
Takeaways
- 📦 Unbox the WeatherTech FloorLiner™ and verify the part number against the receipt to ensure you have the correct product.
- 🧐 Check the orientation of the floor liners, ensuring the WeatherTech labels are on the outside for proper installation.
- 🚗 Identify the correct floor liners for the driver's and passenger's sides based on the vehicle's layout.
- 📄 Read and follow the yellow instruction label provided with the floor liners for proper installation guidance.
- 🧹 Clean the vehicle floor thoroughly, removing all previous floor mats and debris to ensure a proper fit for the new floor liners.
- 🔧 Utilize the vehicle's factory retention system, if available, for secure installation of the floor liners.
- 🚫 Avoid placing floor liners on top of the gas and brake pedals to ensure proper functionality and safety.
- 👀 Inspect the floor liners after any car service or wash to confirm they are correctly installed and secured.
- 📖 Keep the instruction sheet with the owner's manual for future reference and to instruct others who may drive or own the vehicle.
- 🛠️ Use WeatherTech cleaner and protector to maintain the floor liners and keep them in good condition.
Q & A
Who is the presenter in the WeatherTech FloorLiner™ installation video?
-The presenter in the WeatherTech FloorLiner™ installation video is David Mcneel.
What is the first step in installing WeatherTech floor liners?
-The first step in installing WeatherTech floor liners is to remove all previously installed floor mats and clean the vehicle floor to ensure proper fit.
How does one determine if they have the correct parts for their vehicle?
-To determine if you have the correct parts, you should check the part number on the floor liner against the receipt, as demonstrated with part number 456971.
What is the significance of the WeatherTech labels on the floor liners?
-The WeatherTech labels on the floor liners should be positioned on the outsides, helping to identify the correct orientation and side for installation.
Why is it important to ensure the gas and brake pedals are on the top side of the floor liner?
-It is important to ensure the gas and brake pedals are on the top side of the floor liner to maintain full and unobstructed movement of the pedals after installation.
What should one do if their vehicle has a factory retention system?
-If the vehicle has a factory retention system, it should be utilized when installing the WeatherTech floor liners for secure fitting.
How should one check the proper installation of the floor liners after a car wash or service?
-It is your responsibility to visually inspect the vehicle to ensure the floor liner is fitting perfectly and is 100% secured by the factory floor mat or floorliner retention system.
What are the recommendations for maintaining the WeatherTech floor liners after installation?
-It is recommended to use WeatherTech cleaner and protector to properly maintain the floor liners after installation.
How does the retention system differ between a Ford and a BMW?
-The Ford retention system involves snap caps that are placed on factory posts, while the BMW system uses a bayonet mount to attach the WeatherTech floor liner.
What is unique about the Tech Grip 2 used in the Chevy Silverado installation?
-Tech Grip 2 has sharp spikes that bite into the carpeting to prevent the floor liner from sliding around, but it requires pressing a pencil over the retention device to activate the spikes.
Outlines
🛠️ Installing WeatherTech Floor Liners
In this paragraph, David mcneel begins the process of installing WeatherTech floor liners in his F-150. He starts by opening the delivery box with a box cutter and verifying the part numbers of the liners against the receipt. David emphasizes the importance of having the correct parts and ensuring that the floor of the vehicle is clean and free of any previous mats or debris. He also discusses the orientation of the floor liners, ensuring that the WeatherTech labels are on the outside. The paragraph highlights the necessity of using the factory retention system if available and the need to place the floor liners in such a way that they do not interfere with the gas and brake pedals. David provides a step-by-step guide on the installation process, including the removal of old mats, proper placement, and securing of the floor liners.
👀 Ensuring Correct Installation and Post-Installation Inspection
This paragraph focuses on the responsibility of the vehicle owner to inspect the installation of the floor liners, especially after they have been potentially tampered with by others. David stresses the importance of making sure the floor liners fit perfectly and are secured properly to the vehicle's floor. He advises that the owner should visually inspect the vehicle after any service or car wash where the floor liners might have been removed or reinstalled. The paragraph also touches on the need to educate other drivers of the vehicle on the correct installation process and the importance of keeping the instruction sheet in the owner's manual for future reference. Additionally, David shares his satisfaction with the fit and protection provided by the WeatherTech floor liners in his F-150.
🚗 Customizing Floor Liners for Different Vehicle Models
In this paragraph, David demonstrates the installation process of WeatherTech floor liners in various vehicle models, highlighting the differences in retention systems and the unique aspects of each vehicle. He starts with a BMW, explaining how to remove the factory velcro-style retention pads and install the WeatherTech retention device called MatGrip. For a Chevy Silverado, David uses TechGrip 2, a product designed to prevent the floor liner from sliding by biting into the carpet. The paragraph also covers the installation in a Honda vehicle, noting the horizontal slots for the factory retention devices, and an Audi Q5, which features a dual post retention system. Throughout the paragraph, David ensures that the floor liners do not interfere with the full movement of the gas and brake pedals, maintaining the vehicle's safety and functionality.
Mindmap
Keywords
💡WeatherTech® FloorLiner™
💡Installation
💡Part Number
💡Retention System
💡Gas Pedal and Brake Pedal
💡Cleanliness
💡Laser Measured
💡Protector
💡Vehicle Specific
💡Instruction Label
💡Owner's Manual
Highlights
David mcneel explains the installation process of WeatherTech FloorLiner™.
Ensure you have the correct parts by matching the part number on the receipt with the floor liner.
Flip the floor liners over to prepare for installation, recycling the packaging bags.
WeatherTech labels should be on the outside of the floor liners for proper orientation.
Identify the driver's and passenger's floor liners by their shape and label positioning.
Follow the yellow instruction label for critical steps in the installation process.
Remove all previously installed floor mats and ensure the vehicle floor is clean before installation.
Utilize the factory retention system if available for secure installation.
Ensure the gas and brake pedals are on the top side of the floor liner for proper functionality.
Visually inspect the floor liners after any service or car wash to ensure correct placement and security.
Instruct others who drive the vehicle on the correct installation and care of the floor liners.
Install the passenger side floor liner carefully, making sure it fits nicely and is clean.
Check the part number of the rear floor liner and unfold it for installation.
Position the rear floor liner to cover the entire rear seating cargo area, following the vehicle's contour.
Use WeatherTech cleaner and protector for proper care of the installed floor liners.
Different vehicles have unique retention systems, like the Ford, BMW, Chevy, and Honda.
For BMW, remove the factory velcro style retention pads and use the WeatherTech mat grip for secure placement.
Chevy vehicles use Tech grip 2, with sharp spike pads for non-slip floor liner installation.
Honda's lateral retention system requires the twisty devices to be positioned crossways in the car for proper installation.
Audi's dual post retention system allows for a simple snap-on installation of the WeatherTech floor liner.